BrunoTomazelli ⎜May 30, 2017 ⎜
The portable contamination monitor is using 2 scintillator materials. For detection of alpha-radiation ZnS is used. For detection of beta and gamma radiation a plastic scintillator foil is used.
The large area detector window is permeable for low energy alpha radiation like U-238 beta radiation like C-14 The thin window can be replaced easily by the user and measurements can be continued without much delay.
The light flashes generated by the alpha or beta/gamma radiation can be separated by pulse analysis.
The detected events are counted over time and displayed digitally in c/s, Bq or Bq/cm2. Nuclide specific sensitivity is calculated and alarm values are preprogrammed.
Measurement results can be stored and transferred by RS 232 C.
BrunoTomazelli ⎜May 30, 2017 ⎜
Fullcheck: automatically checks the device functions during power on. Also during operation a complete instrument check can be carried out at a single key stroke. Here also display and keypad are checked besides the electrical characteristics.
Sensoface: checks the electrode and provides information on the electrode condition. The zero, slope, response time and glass impedance of the electrode as well as the calibration interval are evaluated.
Calimatic: automatically recognizes the right buffer. It allows calibration at the stroke of a key, providing ease of use and – above all – safety.
Trueline: delivers a calibrated analog recorder signal, of course electrically isolated. This provides you with a true pH signal, calibrated for the electrode and without disturbing quantizing levels, permitting undistored recording of pH curves.
BrunoTomazelli ⎜May 30, 2017 ⎜
The osmometer determines the osmolality by measuring the freezing point depression of the liquid sample.
The Osmolality describes the concentration of osmotic effective particles in the sample solutions. This is independent from type, composition or electrical charge of the solution, because it refers to the mass of the solution.
The system allows a simple handling with a short measuring time. The system has been adapted to the use of radioactive substances, reducing the irradiation risk.
BrunoTomazelli ⎜May 30, 2017 ⎜
Analytical balance for determination of accurate weight for preparation of precursors for the synthesis of PET compounds.
The analytical balance has a large display for easy reading of the determined weight.
Multiple weight units including a user defined custom unit for use in unique weighing applications.
The pan is made of stainless steel and is easy to clean. Frameless draft screen is available as an option. QuadraStance incorporates for adjusting feet to provide superior footprint stability on any surface.
The balance has a front level indicator for fast check before any use.
The balance can be operated by AC and/or battery. An automatic shut off feature helps to conserve battery life.